IE Audi TTS MK2 Cold Air Intake Carbon Fiber

Integrated Engineering has introduced a carbon fiber cold air intake for the Audi TTS mk2. It adds horsepower, torque, sound, and throttle response to your MK2 TTS with this lightweight and attractive carbon fiber intake kit.

  • INCREASED HORSEPOWER & TORQUE – Increase your power output across the entire RPM range
  • ENHANCED ENGINE, TURBO, & BLOW-OFF SOUND – Add excitment to your drive
  • HIGH-FLOW BELLMOUTH – Increases air velocity for maximum performance
  • MASSIVE OVER-SIZED AIR FILTER – Will support any horsepower target
  • REAL CARBON FIBER – Lightweight and looks great in your engine bay
  • EASY INSTALL – No major modifications needed to the car & is easily reversible
  • USES FACTORY MOUNTING GROMMETS & HARDWARE – No unwanted trips to the auto parts store
  • HEAT SHIELDING & DIRECTED AIR FLOW – For lowest possible intake temperatures
  • REINFORCED SILICONE HOSES – For reliablity and longevity
  • OPTIONAL NOISE DOORS – Removeable doors increase turbo and throttle sounds
  • mk2ttsintake_13_1

    Feed your Audi MK2 TTS turbo with a supply of cold air with this direct-fit high-flow cold air intake kit. This intake features a generously-sized inlet pipe that connects to the OE mass air flow (MAF) sensor. The MAF sensor receives high-velocity air fed directly from a 5″ velocity stack. Our high-flow velocity stack is neatly housed in a carbon fiber intake lid, which separates the air filter from hot under-hood air, allowing only cold air to be drawn in to the turbo inlet directly from the front of the car.

    mk2ttsintake_01_1

    DIRECT FIT
    This air intake kit provides all the necessary piping and couplers to plumb the intake system from the turbo to the MAF and then to the carbon intake lid. The carbon intake lid installs using the OE hardware for easy maintenance and reliable mounting with no rubbing or interference with other factory parts.

    mk2ttsintake_07_1

    HIGH-FLOW BELLMOUTH
    The air intake utilizes a high-flow carbon fiber bellmouth behind the massive cone air filter to deliver as much air as possible. This bellmouth design increases the air velocity to the MAF and pulls cold air equally from all directions into the filter. This bellmouth is securely fastened to the carbon lid as a clean pass-through providing a solid mount for the air filter and OE MAF. Furthermore, the bellmouth opening allows for a filter with a very large surface area that can support any horsepower goal. The same filter and bellmouth design has been tested to support over 500HP on our twin-scroll big turbo kits with huge success.

    mk2ttsintake_09_1

    OPTIONAL NOISE DOORS
    This intake kit features a unique feature allowing gasket sealed “sound doors” to be installed or removed giving the owner control of the intake noise. Removing one or both of the intake doors will either increase or reduce the amount of throttle and turbo noise. This feature delivers all the benefits of both a closed box and open air filter intake designs. Removing or installing the sound doors does not effect the performance increase of this intake.

    mk2ttsintake_2

    CARBON FIBER INTAKE LID
    The IE carbon fiber intake lid is designed to create a thermal barrier blocking all of the radiant heat from the engine bay. Only cold air from the front of the vehicle is drawn into the filter from the opening in the radiator support keeping air intake temperatures as cold as possible. This allows factory placement of the intake to be used without placing the filter lower in the vehicle where it can be subjected to engine harming road debris or fluid.

    Leave a Reply

    Your email address will not be published. Required fields are marked *