The GruppeM RAMair intake system was recently tested on a 2008 Audi RS4 to verify performance gains. The results are summarised as follows:
STOCK VS. GRUPPEM INTAKE DYNO COMPARISON:
Stock intake whp: 341.9 @ 7500 rpm GruppeM intake whp: 361.1 @ 7500 rpm
Stock intake trq: 296.7 lb-ft @ 3700 rpm GruppeM intake trq: 306.2 lb-ft @ 3700 rpm
Peak Gains: 21.5 whp @ 8300 rpm, 15.1 lb-ft @ 6700 rpm*
*Average gain of 15.3 whp and 12.4 lb-ft of torque from 4500-8500 rpm
Stock intake: 8.66-sec GruppeM intake: 8.38-sec*
60-120MPH TEST:
Stock intake: 10.9-sec GruppeM intake: 10.6-sec

The GruppeM arrangement showed a consistent improvement by 3F. When stationary or cruising at low speeds, the carbon fiber GruppeM air box kept air intake temperatures lower over the OEM plastic air intake, with less heat-soak when compared to the stock arrangement.
Related reading
- Revolution releases Pipercross Audi RS4 4.2 V8 Carbon Airbox Kit
- IE Audi TTS MK2 Cold Air Intake Carbon Fiber
- More in Audi A4
GruppeM RAMair intake dyno results
On a 2008 Audi RS4, the stock intake made 341.9 whp and 296.7 lb-ft, while the GruppeM intake made 361.1 whp at 7500 rpm and 306.2 lb-ft at 3700 rpm. Peak gains are 21.5 whp at 8300 rpm and 15.1 lb-ft at 6700 rpm, with an average gain of 15.3 whp and 12.4 lb-ft from 4500 to 8500 rpm.
Acceleration and temperatures
A timed run improved from 8.66 to 8.38 seconds, and the 60 to 120 mph test from 10.9 to 10.6 seconds. The carbon fiber air box also kept intake temperatures lower than the OEM plastic intake, with less heat soak.




Great job testing a part that is a big part of the Audi community. I was wondering have you guys tested this intake for the B7 S4? If so what were the results? Thanks and keep up the good work.
I need prices for intake carbon fiber for Audi RS4 2008 Thanks !!!!!
Hi, you need to contact GruppeM please